The T78 small 10a relay products produced by our company are widely used as automotive relays, so how to install the T78 car 10a relay products? What should I pay attention to when installing the T78 car 10a relay products? The following editor briefly talks about the T78 car 10a relay How to install products

　　1, installation direction

　　 If the installation direction is consistent with the impact resistance of 10a relay products, the performance of the relay can be fully utilized. It is recommended to make the impact direction perpendicular to the direction of movement of the contact and the armature, which can effectively improve the vibration and impact resistance of the normally closed contact in the non-excited state. When installing, make the contact axis of the relay parallel to the ground, which can avoid contact splashes and carbides from falling on the contact surface and improve contact reliability. For multiple groups of relays, avoid the small load contacts from being located below the large load contacts.

　　2, do not install too close

　　 When multiple 10a relay products are installed in close distance, it will cause abnormal heating. Generally, 2mm spacing is recommended. Polarity or magnetic latching relays installed close to each other will affect the operating voltage.

　　3. When installing the relay in the shell, you cannot remove the shell and install it first. In order to prevent loosening, damage, and deformation, please use spring washers. The tightening torque should be within the range of 0.5～70N·m.

　　4. The recommended insertion strength of plug-in relays is 40～70N.

　　5. Products that meet the same load requirements have different dimensions. According to the allowable installation space, products with low height or small installation area can be selected.

　　 With the maturity of 10a relay products technology, the volume of automotive relays is getting smaller and smaller, and the service life is longer and longer. T78 automotive relays are loved by more and more customers.

　　 The correct installation of automobile 10a relay products can protect the relay well, maximize the service life of the relay, and maintain the sensitivity of the relay.

　　 The above are just the precautions when installing the simple car 10a relay products, I hope it will be helpful to you.